Stone Cylinder Wall Sconce
1 PIECE
10% Off
2 PIECES
13% Off
3 PIECES
15% Off
-
Envio: Gratuito para a maioria dos destinos. Os destinos Fast Shipping custam 100 USD por artigo. Ver detalhes
Stone Cylinder Wall Sconce
DESIGNER CONCEPT
A stone cylinder on a bent arm, set against a rectangular backplate.
This is a hardwired wall sconce. A stone shade hangs from a bent metal arm, and the arm returns through a tall backplate. Light leaves through the open bottom of the shade.
COLOR, SIZE, LIGHTS
Choose a color pair. Size and lights stay fixed.
Color is the only purchase choice: six matched pairs. A travertine shade goes with a walnut or travertine backplate and a brass arm. An alabaster shade goes with a black metal arm and backplate. Size is not a second option. Lights stay at one head per fixture.
ColorSix pairs below. Shade and base stay matched
SizeRounded shade: 14.17 in H × 7.87 in Dia × 10.63 in W. Straight shade size is not listed
Lights1 per fixture. Not a head-count option
Color
Brass arm. Rounded shade size applies.
Brass arm. Rounded shade size applies.
Brass arm. Straight shade size is not listed.
Brass arm. Straight shade size is not listed.
Black arm and backplate. Rounded shade size applies.
Black arm and backplate. Straight shade size is not listed.
EXTERIOR DESIGN
Two shade profiles. Two material pairs.
The arm leaves the backplate, bends forward, and drops into the center of the shade. Light leaves through the open bottom. Travertine shades keep a dry, pitted surface. Alabaster shades are paler and more translucent, and they use the black metal arm and backplate.
The shade swells through the middle and rounds at the top and bottom edges.
The side wall stays closer to a vertical cylinder.
The paler shade pairs with a matte black arm and backplate.
ROOMS AND GLOW
Beside a passage, table, mirror, bed, or desk. Quiet by day, warm when switched on.
Mount it on a hallway wall, over a dining table, beside a bath mirror, above a bed, along a sofa, or over a desk. By day the stone sits on the wall in natural light. The bathroom photo still shows a low glow in the shade. Switched on at night, warm light leaves the open bottom and pools on the wall. The off and on photos below are different rooms.
DETAIL DISPLAY
Pitted travertine, a brass joint, and a walnut backplate.
These close-ups show the rounded travertine shade, the brass arm, and the walnut backplate. They do not show the alabaster shade, the travertine backplate, or the black metal finish.
PRODUCT SPECIFICATIONS
Rounded shade measured. One E26 bulb, sold separately.
| Product | Hardwired stone cylinder wall sconce |
|---|---|
| Shade | Rounded or straight cylinder, travertine or alabaster |
| Base | Walnut, travertine, or black metal, in the six pairs shown above |
| Arm | Brass with travertine shades. Black metal with alabaster shades |
| Rounded size | 14.17 in H × 7.87 in Dia × 10.63 in W / 36 × 20 × 27 cm |
| Straight size | Not listed |
| Lights | 1 |
| Bulb base | E26 |
| Bulbs included | No |
| Installation | Hardwired wall mount |
| Placement | Hallway, dining room, bathroom, bedroom, living room, or study |
The drawing measures the rounded shade only. A bulb is not included. Use one E26 bulb.
Também pode gostar
Escultura decorativa de cão galgo em resina.
Aplique de parede em metal alabastro natural
Luminária pendente cilíndrica em travertino preto com cúpula em tela metálica.
Luminária de parede LED externa à prova d'água com cúpula texturizada
Aplique de parede com múltiplas lâmpadas e textura de travertino
Luminária de parede minimalista de cerâmica para cabeceira
Luminária de mesa recarregável por toque em pedra travertino
Miniaturas de leão e leopardo esculpidas à mão em madeira.
